Oil Expeller Spare Parts: Pulleys, Gears and Gearboxes
Industry · Agro & Food
V belt pulleys, expeller gears and bevel pinions, chain wheels and worm gearboxes for oil expellers, seed kettles and elevators. Standard sizes or matched to your worn sample, machined in Ahmedabad.
- Since 1997
- Made to drawing
- Made in Ahmedabad
Products used
- Oil expeller pulleys
- Expeller gears
- Chain wheels
- Kettle worm gearboxes
Where our parts run
Drive parts for oil expellers, kettles and seed conveyors
-
Pressing
Oil expeller main drive
Motor, multi groove V belts and a reduction gear train turning the expeller worm under heavy load.
- Expeller pulley
- Expeller single gear
- Bevel pinion
-
Conditioning
Seed cooker (kettle)
Slow stirrers inside the kettle need a compact reducer that runs all shift.
- Kettle worm gearbox
- Chain wheel
-
Filtration
Filter press
Plate shifting and the feed pump run through gear and chain drives.
- Spur gears
- Chain sprockets
-
Conveying
Redler and screw conveyors
Move seed and cake between machines; the drive end takes shock as the conveyor loads up.
- Redler chain wheel
- Taper lock bush
-
Conveying
Bucket elevator
Lifts seed to the hoppers on a head shaft drive.
- Elevator chain wheel
- V belt pulley
-
Preparation
Decorticator
Removes the shell before pressing on a belt driven beater rotor.
- V belt pulley
Oil Mill spare parts
Chain wheels, pulleys and gears for oil mills
Built for the conditions
What oil mill drives have to handle
-
Round the clock running in season
Concentric machining and balanced pulleys so belts and bearings last longer between stops.
-
Shock loads from the expeller worm
Gears hobbed and ground in EN series steels, with hardening on request, and cast iron pulleys sized for the load.
-
Oil mist and seed dust
Black oxide or plated finishes on request, and enclosed worm gearboxes for the slow speed drives.
Replacing a worn part
Oil expeller pulleys and gears made to your sample
No drawing? A worn expeller gear, pulley or chain wheel, or clear photos with the key sizes, is enough to start. Send your expeller model if you know it.
-
Send the part
A worn part, a drawing or photos with the key sizes.
-
We confirm
Profile, bore, material and finish, agreed with you.
-
We machine
CNC turning, hobbing and grinding in Ahmedabad.
-
QC and dispatch
Checked against your sizes, packed and shipped.
FAQ
Oil Mill: common questions
Quick answers for maintenance and purchase teams.
Most oil expellers are driven from the motor through a multi groove cast iron V belt pulley, then through gears or a reduction gearbox to the expeller worm. We machine the pulley and the drive gears to your sample or drawing.
Yes. Send the worn gear, or photos with the outer diameter, tooth count, bore and keyway. We confirm the details with you and machine a matching gear. The same applies to expeller pulleys and bevel pinions.
Kettle (seed cooker) stirrers usually run on a worm reduction gearbox. Ours come in ratios from 1:5 to 1:60 and suit stirrers, conveyors and other slow speed drives in the oil mill.
